Clean the probe jack and port, and make sure jack is secure in the port. 


Baking Method:

This is done if moisture has broken the seal and gotten into the probe.

  1. Preheat Oven to 350F
  2. Place the probes inside of oven with the wires running on the outside
    1. Probes should be disconnected from Tappecue.
  3. Bake for 3 to 4 hours.
  4. Remove from oven and test with known temperatures 



**Temperatures may not be exact, varies depending on elevation, humidity and minerals in water**

  1. Ice water, about 32 F
  2. Boiling water, about 212 F