Older Versions FAQ
Water getting inside the probe into the tip may cause the probe to read a wrong value. Drying out in an oven might fix the issue. If you smoke with high h...
Fri, 24 Aug, 2018 at 9:47 AM
If you are not receiving the confirmation messages on the installation program try unplugging and plugging the Tappecue back in from the wall and the comput...
Fri, 24 Aug, 2018 at 9:47 AM
The version number of any Tappecue device appears briefly on the LED screen of the device upon booting.
Fri, 24 Aug, 2018 at 9:47 AM
Reboot your Tappecue device by simply unplugging and plugging the device back in.
Fri, 24 Aug, 2018 at 9:47 AM
The Tappecue runs on a 2.4GHz network. The default settings of the Time Capsule is set for both 5GHz and 2.4GHz in one network. It's best to use the f...
Fri, 24 Aug, 2018 at 9:47 AM
The Account ID is your personal username for your account. Make it whatever you would like for it is not assigned by us but by you. Use it later to log in...
Thu, 10 Jan, 2019 at 9:36 AM
No, the Tappecues come with the latest firmware version already on them.
Fri, 24 Aug, 2018 at 9:47 AM
When it doesn't complete the firmware update the LCD goes blank.You can try it again. Sometimes people download a link instead of a file and it's n...
Fri, 30 Jun, 2017 at 1:23 PM
Below is information on the LEDs on the module. Each light provides information to you. LED Info: Solid Green Light: Connected through TCP. Slow Blinking Gr...
Fri, 24 Aug, 2018 at 9:47 AM
Do you have more USB devices plugged in besides the Tappecue?
Unplug all other devices, reboot the PC/MAC, then plug in the USB and power for the Tappecue...
Fri, 24 Aug, 2018 at 9:47 AM